HOBO RX3000 Remote Monitoring Station Data Logger
This item ships FREE!HOBOware software and USB cable are required for initial setup of Wi-Fi units or Ethernet units with Static IP addresses. HOBOlink is a web-enabled software platform designed for the RX3000. Learn more.
Overview
The HOBO RX3000, Onset’s most flexible remote data logging station, provides instant access to site-specific environmental data anywhere, anytime via the internet. The station combines the versatility and sensor quality of more expensive systems, an onboard LCD display, and the convenience of plug-and-play operation. The RX3000 is a configurable system (see "Configure System" tab below).
Only need cellular? For a cellular-only solution, the HOBOnet MicroRX Station (RX2105) offers easy-to-deploy, affordable, wireless indoor monitoring.
- Flexible support for a broad range of sensors
- LCD display for easy deployment
- Cloud-based data access through HOBOlink
- Get 24/7 web access to your data via web browser
- Verify RX3000 system status remotely
- Set up and manage alarm notifications over the web
- Schedule automated delivery of data
- Plug-and-play operation
- Alarm notifications via text, email
- Cellular, Wi-Fi, and Ethernet options are available
- Configurable from your mobile device
- Optional Analog Input, Relay, and Water Level Sensor Modules
In what environment does this operate?
This operates in an indoor environment.
What measurements does this support?
The supports the following measurements: Relative Humidity and Temperature
The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.
|
Operating Range |
-40° to 60°C (-40° to 140°F); no remote communications for battery voltage less than 3.9 V DC |
|
Smart Sensor Connectors |
10 |
|
Smart Sensor Network Cable Length |
100 m (328 ft) maximum |
|
Smart Sensor Data Channels |
Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details) |
|
Module Slots |
2 |
|
Logging Rate |
1 second (RX3001 and RX3002) or 1 minute (RX3003 and RX3004) to 18 hours |
|
Time Accuracy |
±8 seconds per month in 0° to 40°C (32°F to 104°F) range; |
|
Battery Type/Power Source |
4 Volt, 10 AHr, rechargeable sealed lead-acid; external power required using one of these options: AC power adapter (AC-U30), solar panel (SOLAR-xW), or external power source 5 V DC to 17 V DC with external DC power cable (CABLE-RX-PWR) |
|
Rechargeable Battery |
Typical 3–5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F); operation outside this range will reduce the battery service life |
|
Memory |
32 MB, 2 million measurements, continuous logging |
|
Alarm Notification Latency |
Logging interval plus 2–4 minutes, typical |
|
Enclosure Access |
Hinged door secured by two latches with eyelets for use with user-supplied padlocks |
|
LCD |
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range |
|
Materials |
Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge pins and brass inserts; Inner enclosure: Polycarbonate; Gaskets: Silicone rubber; Cable channel: EPDM rubber; Cable opening cover: Aluminum with ABS plastic thumb screws; U-Bolts: Steel with zinc dichromate finish |
|
Size |
18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.); see diagrams on next page |
|
Weight |
2.2 kg (4.85 lb) |
|
Mounting |
3.8 cm (1.5 inch) mast or wall mount |
|
Environmental Rating |
Weatherproof enclosure, NEMA 4X (requires proper installation of cable channel system) |
|
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) |
|
|
RX3002: FCC ID R68XPICOW, IC ID 3867A-XPICOW |
|
Wireless Radio |
RX3003: |
|
Antenna |
RX3003: Penta band |
|
Ethernet (RX3001) |
|
|
Connector |
One RJ45/100BaseT |
| Wi-Fi (RX3002) | |
|
Network Standards |
IEEE 802.11b/g/n |
|
Frequency Range |
2.412–2.484 GHz |
|
Antenna Connector |
1, no diversity supported |
Data Rates |
1, 2, 5.5, 11 Mbps (802.11b); 6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g); 802.11n, HT20 MCS0 (6.5 Mbps) to HT20 MC87 (65 Mbps) |
|
Number of Selectable Radio Subchannels |
Up to 14 channels; profiles available will include USA, France, Japan, Spain, Canada, and “Other” (multiple countries) |
|
Radio Modulations |
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM |
|
Security |
WEP 64/128, WPA-PSK, AES end-to-end encryption, WPA2, protocols not listed are not supported |
|
Maximum Receive Level |
-10 dBm (with PER <8%) |
|
Receiver Sensitivity |
-72 dBM for 54 Mbps, -87 dBm for 11 Mbps, -89 dBm for 5.5 Mbps, |
|
Cellular (RX3003 and RX3004) |
|
|
Wireless Radio |
RX3003: |
|
Antenna |
RX3003: Penta band |
1. Communication
A. Choose your communication option:
B. Choose your data plan:
2. Power
3. Environment
Choose where your logger will be deployed:
3. Wireless Sensors
Choose your wireless sensor(s):
4. Wired Sensors
Choose your wired sensor(s):
5. Water Level
If you need water level measurement please select one sensor and one cable. A RXMOD-W1 is required and will be automatically added below.
If more than one water sensor is needed, please contact sales.
Select One Sensor: (Reset below)
Select One Cable:
The 1, 5, 10, 15, 30, and 60 meter cables are typically in stock, while other cables are custom lengths with a 1-2 week lead time.
Water Level Sensor Module:
Mounting: (RECOMMENDED)
5. Modules
6. Accessories
Please review your order:
Estimated Order Total: 0 USD
- HOBO RX3000 Remote Monitoring Station
- Two plates for cable access openings with eight thumbscrews and one wrench
- Two rubber cable channels
- Rubber plugs
- Grease packet
- Two mounting plates with four screws
- Grounding wire
- Two U-bolts
The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!
Customers Also Bought
The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements. These four, single-ended sensor inputs are configured through HOBOlink. A HOBO RX3000 is required for this product.
The RX3000 Water Level Sensor Module (RXMOD-W1) offers users the ability to monitor water level, pressure, and temperature, as well as barometric pressure, with the HOBO RX3000 Remote Monitoring Station. It is configured through HOBOlink, Onset’s cloud-based software. For water level applications, a HOBO RX3000 station, water level sensor cable (CABLE-RWLMOD-XXX), and water level sensor (MX2001-0X-S or MX2001-0X-Ti-S) are required.
The Wind Sensor Set includes Onset's research-grade plug-and-play Wind Speed Smart Sensor and the Wind Direction Smart Sensor. This combination provides average wind speed, highest 3-second wind gust, and average wind direction for the measurement interval. These durable sensors will provide many years of accurate and reliable performance.
NOTE: Mount these on the M-CAA Full Cross Arm for proper sensor spacing for accurate wind measurement in all wind directions.
The cross arm must be mounted on a stable mast, using guy wires as needed to prevent the sensors from vibrating in high winds.
Interested in wireless sensors? The wireless Wind Speed and Direction sensor is available for use with the HOBOnet Field Monitoring System.
Recently Viewed
Detailed Specifications
HOBO RX3000 Remote Monitoring Station Data Logger
|
Operating Range |
-40° to 60°C (-40° to 140°F); no remote communications for battery voltage less than 3.9 V DC |
|
Smart Sensor Connectors |
10 |
|
Smart Sensor Network Cable Length |
100 m (328 ft) maximum |
|
Smart Sensor Data Channels |
Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details) |
|
Module Slots |
2 |
|
Logging Rate |
1 second (RX3001 and RX3002) or 1 minute (RX3003 and RX3004) to 18 hours |
|
Time Accuracy |
±8 seconds per month in 0° to 40°C (32°F to 104°F) range; |
|
Battery Type/Power Source |
4 Volt, 10 AHr, rechargeable sealed lead-acid; external power required using one of these options: AC power adapter (AC-U30), solar panel (SOLAR-xW), or external power source 5 V DC to 17 V DC with external DC power cable (CABLE-RX-PWR) |
|
Rechargeable Battery |
Typical 3–5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F); operation outside this range will reduce the battery service life |
|
Memory |
32 MB, 2 million measurements, continuous logging |
|
Alarm Notification Latency |
Logging interval plus 2–4 minutes, typical |
|
Enclosure Access |
Hinged door secured by two latches with eyelets for use with user-supplied padlocks |
|
LCD |
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range |
|
Materials |
Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge pins and brass inserts; Inner enclosure: Polycarbonate; Gaskets: Silicone rubber; Cable channel: EPDM rubber; Cable opening cover: Aluminum with ABS plastic thumb screws; U-Bolts: Steel with zinc dichromate finish |
|
Size |
18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.); see diagrams on next page |
|
Weight |
2.2 kg (4.85 lb) |
|
Mounting |
3.8 cm (1.5 inch) mast or wall mount |
|
Environmental Rating |
Weatherproof enclosure, NEMA 4X (requires proper installation of cable channel system) |
|
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) |
|
|
RX3002: FCC ID R68XPICOW, IC ID 3867A-XPICOW |
|
Wireless Radio |
RX3003: |
|
Antenna |
RX3003: Penta band |
|
Ethernet (RX3001) |
|
|
Connector |
One RJ45/100BaseT |
| Wi-Fi (RX3002) | |
|
Network Standards |
IEEE 802.11b/g/n |
|
Frequency Range |
2.412–2.484 GHz |
|
Antenna Connector |
1, no diversity supported |
Data Rates |
1, 2, 5.5, 11 Mbps (802.11b); 6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g); 802.11n, HT20 MCS0 (6.5 Mbps) to HT20 MC87 (65 Mbps) |
|
Number of Selectable Radio Subchannels |
Up to 14 channels; profiles available will include USA, France, Japan, Spain, Canada, and “Other” (multiple countries) |
|
Radio Modulations |
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM |
|
Security |
WEP 64/128, WPA-PSK, AES end-to-end encryption, WPA2, protocols not listed are not supported |
|
Maximum Receive Level |
-10 dBm (with PER <8%) |
|
Receiver Sensitivity |
-72 dBM for 54 Mbps, -87 dBm for 11 Mbps, -89 dBm for 5.5 Mbps, |
|
Cellular (RX3003 and RX3004) |
|
|
Wireless Radio |
RX3003: |
|
Antenna |
RX3003: Penta band |